Out-of-Stock Mainsheet Blocks and Systems 57mm Red Ratchet Block — Swivel HARKEN HRK-0016 €95.00 With the Harken Carbo Ratchets you can hand-hold loaded lines, balancing between holding power and controlled easing. The specific on/off switch can be operated from each side. Ideal for Optimist, ILCA and other sailing dinghies. More colours are available apart from Red. Standard grip: medium/light air; Holding power: 10:1; View
Out-of-Stock Blocks And Cleats 20mm Single Dynamic Block With Fork Head - Allen allen ALL-0010 €25.00 The A2020F is Allen's Fork Head, lightweight strong and go-to low friction, fast rolling, small pulley, ideal for dinghies, windsurfing, kitesurfing and anything running up to 6mm diameter lines. The removable clevis pin makes the attachment of this block super easy. Allen patented bearing system uses twin rows of stainless-steel ball bearings running on... View
Out-of-Stock Blocks And Cleats Ronstan RF70 Swivel Cleat Base - w/o cleat Ronstan RNS-0011 €115.00 Ronstan RF70 Swivel Cleat Base, without the RF5001 cleat and fairlead. Includes original Ronstan screws and bolts. Specific for 49er crews who decide to use an alternative Cleat. View
Last items in stock Blocks And Cleats Ronstan RF70 Swivel Cleat Base Ronstan RNS-0012 €135.00 Ronstan RF70 Swivel Cleat Base. Used on 49er skiffs. Add to cart
Product On Demand Blocks And Cleats Harken Micro Cam-Matic® Cleat HARKEN HRK-0021 €45.00 Harken Micro Cam-Matic® ball bearing cam cleat hold your lines securely and release them instantly for an easy and precise trimming.Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Use for: 49er jib system Add to cart
Last items in stock Blocks And Cleats 20mm Single High Load Dynamic Block - Allen allen ALL-0002 €39.50 The A2020HL 20mm Single High Load Dynamic Block, is built with a high load stainless-steel sheave, for even faster rolling speeds, higher working loads and lower friction when compared to the standard acetal sheave, allowing the block to work with both rope and wire. Ideal for use in higher loaded applications in dinghies, windsurfing, kitesurfing and... Add to cart
Product On Demand Blocks And Cleats 30mm Single High Load Dynamic Block With Fork - Allen allen ALL-0003 €53.00 The Allen A2030HLF 30mm Single High Load Dynamic Block With Fork, has been manufactured with a high load stainless-steel sheave, allowing to work at faster rolling speeds, with higher working loads and lower friction, in comparison to standard acetal sheaves. Designed to work with both rope and wire. The ideal block for higher loaded applications in... Add to cart
Last items in stock Blocks And Cleats 30mm Single High Load Dynamic Block - Allen allen ALL-0007 €47.50 The A2030HL 30mm Single High Load Dynamic Block, is built with a high load stainless-steel sheave, for even faster rolling speeds, higher working loads and lower friction when compared to the standard acetal sheave, allowing the block to work with both rope and wire. Ideal for use in higher loaded applications in dinghies, windsurfing, kitesurfing and... Add to cart
Product On Demand Blocks And Cleats 30mm High Load Back To Back Dynamic Block - Allen allen ALL-0004 €112.00 The A2038HL 30mm double High Load Back To Back Dynamic Block, is built with high load stainless-steel sheaves, for even faster rolling speeds, higher working loads and lower friction when compared to the standard acetal sheaves, allowing the block to work with both rope and wire. Ideal for use in a dual pole and spinnaker launcher system such as on the 49er. Add to cart
Last items in stock Blocks And Cleats 20mm Single Dynamic Block - Allen allen ALL-0006 €17.50 The A2020 is Allen's lightweight strong and go-to low friction, fast rolling, small pulley, ideal for dinghies, windsurfing, kitesurfing and anything running up to 6mm diameter lines. Allen patented bearing system uses twin rows of stainless-steel ball bearings running on a stainless-steel rail. providing a superior load-carrying ability and longevity,... Add to cart
Last items in stock Blocks And Cleats ILCA XD Plate - with Harken cleats ILCA ILC-0030 €123.50 ILCA legal Cleat Plate for Outhaul and Cunningam systems, with Harken cam cleats and Fairleads (wire under-fairleads included). Suitable for Laser boats. Add to cart
Last items in stock Blocks And Cleats ILCA XD Cleat Plate ILCA ILC-0029 €22.00 ILCA legal XD Cleat Plate for Outhaul and Cunningam systems. Does not include cleats and machine screws. Suitable for Laser boats. Add to cart
Last items in stock XD and Turbo Packs ILCA XD Vang Base Harken ILCA ILC-0028 €205.00 Harken ILCA Legal Vang Base. Blocks and control lines are NOT included. Add to cart
Producto bajo pedido Blocks And Cleats 20mm Double High Load Dynamic Block - Allen allen ALL-0008 €87.50 The A2022HL High Load Dynamic Double Block, is built with two high load stainless-steel Ø 20mm sheaves. This design allows higher working loads, even faster rolling speeds and lower friction, in comparison with standard acetal sheaves. This block can work with both rope and wire. Ideal for use in dinghies, windsurfing, kitesurfing and anything using... Add to cart
Producto bajo pedido Blocks And Cleats 20mm Triple High Load Dynamic Block - Allen allen ALL-0009 €127.50 The Dynamic Double Block A2024HL (High Load), is built with three high load stainless-steel sheaves, with Ø 20mm. It is designed for higher working loads with lower friction (in comparison with standard acetal sheaves) and at faster rolling speeds. Intended to work with both rope and wire. Ideal for use in racing dinghies and any other Watersport... Add to cart
Product on demand Blocks And Cleats 20mm Extreme High Load Single Block - Allen allen ALL-0011 €145.00 The A2020XHL 20mm Single Extra High Load Block, has been designed to deal with extremely high static loads without compromising on low-load dynamic performance. Ideal for use in vang cascades or halyard turning points where static loads can be extremely high but low load fast rolling speeds are required. Different colours available, on order. Add to cart
Last items in stock Blocks And Cleats 20mm TI3-ON High Load Single Dynamic Block - Allen allen ALL-0012 €39.50 The A2020Ti3, initially developed for the paragliding and kiting, is now being used in high performance sailing dinghies such as 49er. Its design results in an easier block to thread webbing strap and rope around. Ideal for use in higher loaded applications in dinghies, windsurfing, kitesurfing and anything other uses requiring smaller diameter lines. Add to cart
Product on demand Blocks And Cleats Allen 20mm High Load Single Cheek Dynamic Block allen ALL-0014 €46.50 The Allen A2026HL 20mm Single High Load Dynamic Block with simple cheek, has been manufactured with a high load stainless-steel sheave, allowing to work at faster rolling speeds, with higher working loads and lower friction, in comparison to standard acetal sheaves. Designed to work with both rope and wire. The ideal block for higher loaded applications... Add to cart
Product on demand Blocks And Cleats Allen 20mm Single High Load Dynamic Block with Swivel Hook allen ALL-0015 €61.50 The A2020HLSHK is a 20mm Single High Load Dynamic Block with Swivel Hook, built with a stainless-steel sheave, for even faster rolling speeds and higher working loads. The specific design deliver a lower friction when compared to the standard acetal sheave, allowing the block to work with both rope and wire. Ideal for use in higher loaded applications in... Add to cart
Last items in stock Blocks And Cleats Allen 6mm Dog Bone allen ALL-0016 €9.50 The A8606 Dog Bone can be used in a variety of applications. Ideal for use with soft shackles as rope stops or spliced to the end of a halyard to make a quick and easy attachment for the sail. Also available in other colours, on order. Add to cart
Last items in stock Blocks And Cleats Allen 8mm Dog Bone allen ALL-0017 €11.95 The A8608 Dog Bone can be used in a variety of applications. Ideal for use with soft shackles as rope stops or spliced to the end of a halyard to make a quick and easy attachment for the sail. Also available in other colours, on order. Add to cart
Last items in stock Blocks And Cleats Allen 15mm Low Friction Ring allen ALL-0018 €11.50 Also known as thimbles, low friction rings, lowering rings, lead rings and hard eyes, are a great alternative to blocks when there is a need for high static-load capabilities. Allen high load thimbles come coated in Teflon to help reduce friction. Also available in other colours, on order. Add to cart
Product on demand Blocks And Cleats Allen 20mm Low Friction Ring allen ALL-0020 €13.15 Also known as thimbles, low friction rings, lowering rings, lead rings and hard eyes, are a great alternative to blocks when there is a need for high static-load capabilities. Allen high load thimbles come coated in Teflon to help reduce friction. Also available in other colours, on order. Add to cart
Available for immediate shipping Blocks And Cleats Allen Small Ball Stopper allen ALL-0019 €1.20 Small Ball Stopper – Ball stoppers can be used in various applications with rope or shock cord. Most commonly used to stop knots from coming undone and to stop a line from leaving a system by creating a bigger stopper. Also available in other colours, on order. Add to cart