Vang Wire Block and Curved Key - ILCA legal

Vang Wire Block and Curved Key - ILCA legal

Name: Vang Wire Block and Curved Key - ILCA legal
Brand: HARKEN
SKU: HRK-0010
Price: 52.5 EUR
Availability: InStock

Last items in stock

€52.50

Tax included

The 466 Harken block, with the special Vang Curved Key (boom side), is suitable for the ILCA legal primary Vang (Kicker) system for ILCA 4, 6 and 7 dinghies. With a 25 mm sheave is suitable for lines up to 4 mm diameter.

16 other products in the same category:

Allen 30mm Single Extreme High Load Dynamic Block

Allen 30mm Single Extreme High Load Dynamic Block 2

Product on demand

Blocks And Cleats

30mm Extreme High Load Single Block - Allen

allen

ALL-0028

€175.50

The A2030XHL 30mm Single Extra High Load Block, has been designed to deal with extremely high static loads without compromising on low-load dynamic performance. Ideal for use in vang cascades or halyard turning points where static loads can be extremely high but low load fast rolling speeds are required. Different colours available, on order.

Classic Blocks

Laser Replacement Vang Block

HOLT

HLT-0003

€12.75

Holt Laser replacement classic vang block.

30mm Single High Load Dynamic Tii-On Block

Product on demand

Blocks And Cleats

30mm Single High Load Dynamic Tii-On Block

allen

ALL-0027

€45.00

The Allen Tii-On blocks are built with a stainless-steel loop at the block's head, which ensures the block always works with the right orientation. The Tii-On range blocks design gives the maximum strength and reliability, minimising the cheek separation, when tied on and loaded up with a soft shackle. Please, bear in mind that to properly attach a Tii-on...

Spar Accessories

CL218 Mk1 Side Entry Mk1 (Port)

Clamcleat

CLC-0006

€8.75

The Clamcleat® CL218 Mk1 Side Entry (Port) is a very strong alloy deck cleat. The side entry fairlead allows ropes to be hooked in for cleating. Also available in anodised finishing (see CL218 Mk1-AN).

Out-of-Stock

Classic Blocks

Blue Block & Becket

HOLT

HLT-0037

€8.91

Holt Laser and Pico replacement blue block and becket.

View

Block Plate with 20mm Dynamic Fork Blocks

Out-of-Stock

Deck Hardware

Block Plate with 20mm Dynamic Fork Blocks

HOLT

HLT-0033

€73.81

Holt replacement block plate complete for Laser® hull. Features two Holt fork headed blocks. Supplied assembled and ready to fit to your boat.

View

Deck Hardware

20mm Dynamic Fork Block

HOLT

HLT-0013

€15.39

Holt Dynamic ball bearing blocks, with Fork end. High performance thanks to an inner bearing system and narrow and high strength stainless steel strap. Sheaves and cheeks are molded from advanced engineering polymers: Line Diameter 2.5-6mm Breaking Load 350Kg Max Dynamic Load 115Kg

Out-of-Stock

Blocks And Cleats

20mm Single Dynamic Block With Fork Head - Allen

allen

ALL-0010

€25.00

The A2020F is Allen's Fork Head, lightweight strong and go-to low friction, fast rolling, small pulley, ideal for dinghies, windsurfing, kitesurfing and anything running up to 6mm diameter lines. The removable clevis pin makes the attachment of this block super easy. Allen patented bearing system uses twin rows of stainless-steel ball bearings running on...

View

PRO STORE

CL826-11 Aero cleat with CL211 Mk2

Clamcleat

CLC-0007

€12.85

The Clamcleat® CL826-11 ia a is a CL826 Aero base fitted with the CL211 Mk2 silver finish aluminium cleat. The CL826-11 is a strong and compact aluminium cleat to be rigged on a rope, easy to rig and adjust. A 5-6mm rope is recommended for most applications. Also available in Anodised finishing ( CL826-11AN )

Blocks and Rigging

ILCA legal Boom Block with Becket

ILCA

ILC-0024

€21.50

ILCA legal Boom Simple Block with Becket - by Harken.

PRO STORE

CL828-68 Aero cleat with CL828

Clamcleat

CLC-0008

€11.50

The Clamcleat® CL828-68 a is a CL828 Aero base fitted with the CL268 silver finish aluminium cleat. The CL828-68 is a strong and compact aluminium cleat to be rigged with ropes of 3 to 4 mm. Easy to rig and adjust. Particularly recommended for ILCA/Laser Toestrap Adjustment systems according to the new class rules (2018) Also available in Anodised...

Blocks And Cleats

16 mm Micro Block with Becket

HARKEN

HRK-0006

€20.25

The Harken 405 block with becket, has a sheave diameter of 16 mm and a bearing system with stainless steel balls in a captive grooved race (patented). It is perfect for small synthetic control lines of high-tech sport dinghies or boards.

Product On Demand

XD and Turbo Packs

ILCA Legal Vang Assembly - by Harken

ILCA

ILC-0020

€299.00

Harken ILCA Legal Vang Kit complete with blocks and control lines. Note: control lines' color and type may vary between packs from different manufacturers, also if completely suitable for any official ILCA races.

Blocks And Cleats

27mm Ballbearing Block Becket & Fork-Hi Load

HOLT

HLT-0022

€21.50

Holt Laser replacement High Tension Vang Block.

Mainsheet Blocks and Systems

Harken Traveler Block for Laser/ILCA

HARKEN

HRK-0001

€59.50

Harken traveler plain bearing block unit, complete unit replaces the original large and small traveler blocks in one piece. ILCA/Laser Class Legal.

Allen 30mm Back to Back High Load Dynamic Block

Product On Demand

Blocks And Cleats

30mm High Load Back To Back Dynamic Block - Allen

allen

ALL-0004

€112.00

The A2038HL 30mm double High Load Back To Back Dynamic Block, is built with high load stainless-steel sheaves, for even faster rolling speeds, higher working loads and lower friction when compared to the standard acetal sheaves, allowing the block to work with both rope and wire. Ideal for use in a dual pole and spinnaker launcher system such as on the 49er.

Welcome to SAILIT PRO

Customer Service

How can we help you?

Store Information

Contact us

SAIL IT PRO slu - Main Warehouse

Calle Nueva Atalaya s/n
Ed.1 - Loc.22
Centro comercial Diana
29688 Estepona
Málaga - España

(+34) 951 156 856

(+34) 667 978 091

sales@sailitpro.com

Welcome to SAILIT PRO

Customer Service

How can we help you?

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information Customize cookies

Functional cookies

Yes

Description and cookies

Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.


PHP_SESSID	dev.sailitpro.com	The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.	Session
PrestaShop-#	dev.sailitpro.com	This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.	480 hours

Advertising Cookies

Yes

Description

These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.

Analytics cookies

Yes

Description

Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.

Performance cookies

Yes

Description

These are used to improve the browsing experience and optimize the operation of the shop.

Other cookies

Yes

Description

These are cookies without a clear purpose or those that we are still in the process of classifying.