Nylon Transom Gudgeon

HLT-0114

€1.25

Holt Laser black toestrap plates.

Deck Hardware

Holt Royal Blue Fairlead

Bow Fairlead suitable for a Laser style dinghy. Holt parts are high-quality replacements that perform the same function as the original part. They should not be confused with official parts bearing the Laser® registered trademark. They cannot be used if you are sailing at an Association event. However, they are perfect for social sailing, sailing schools,...

HLT-0005

€5.35

PRO STORE

Wide Angle Fairlead for 27 mm Holt Cleat

Wide Angle Fairlead for 27mm Holt Cleat. Ideal for replacement Laser Cunningham and Outhaul systems. Suitable for the HLT-0061 cleat and HLT-0032 Holt Cleats & Base Plate Assembly. Please, check class rules for use during official ILCA competitions. Line sizes: 2-7mm Fixing centers: 27mm Fixing screw: M4

HLT-0071

€8.95

Deck Hardware

Open Ended Aluminium Fairlead

Holt open-ended fairlead with new ergonomic design reducing accidental line snags. Modern spark finish fixing bores. Allows flush mounting of fasteners with large counter sinks taking a wider variety of fastening

HLT-0007

€8.74

Self Bailers

Bailer Bung

HLT-0042

€2.78

Holt Laser replacement bailer bung.

Allen 20mm Single High Load Dynamic Block

Blocks And Cleats

20mm Single High Load Dynamic Block - Allen

The A2020HL 20mm Single High Load Dynamic Block, is built with a high load stainless-steel sheave, for even faster rolling speeds, higher working loads and lower friction when compared to the standard acetal sheave, allowing the block to work with both rope and wire. Ideal for use in higher loaded applications in dinghies, windsurfing, kitesurfing and...

ALL-0002

€39.50

Deck Hardware

ILCA/Laser Royal Blue Toestrap Plates

HLT-0004

€1.25

Holt Laser replacement royal blue toestrap plates.

Foils Accessories

ILCA/Laser Centreboard Friction Pad

HLT-0041

€3.50

ILCA/Laser Daggerboard friction pad.

ILCA/Laser Centreboard Friction Pad - Optiparts

Out-of-Stock

Foils Accessories

ILCA/Laser Centreboard Friction Pad - Optiparts

Optiparts

OPT-0032

€4.75

ILCA/Laser Daggerboard friction pad. By Optiparts

View

38mm Aluminium Cam Cleat 3 Row Ball Bearing

Out-of-Stock

Blocks And Cleats

38mm Aluminium Cam Cleat 3 Row Ball Bearing

HLT-0062

€32.21

Aluminium Cam Cleat. Hard anodized & PTFE coated. Optimum jaw profile.

View

Out-of-Stock

Blocks And Cleats

27mm Composite Cleat

Holt Composite Cleat, made with advanced resin composite, deliver greater resistance to heat whilst being UV stable and lightweight. Ideal replacement for the Laser Cleat and Plate used for the Cunningham and Outhaul systems. For ILCA boats, we recommend to check the official Class Rules before the purchase.

HLT-0061

€16.50

View

Blocks And Cleats

Allen Cleats & Base Plate Assembly

ALL-0067

€90.91

Laser control line cam cleats with base, Pro-lead and wire under-fairleads. ILCA/Laser approved part.

Deck Hardware

20mm Dynamic Fork Block

Holt Dynamic ball bearing blocks, with Fork end. High performance thanks to an inner bearing system and narrow and high strength stainless steel strap. Sheaves and cheeks are molded from advanced engineering polymers: Line Diameter 2.5-6mm Breaking Load 350Kg Max Dynamic Load 115Kg

HLT-0013

€15.39

Allen 30mm Single High Load Dynamic Block

Blocks And Cleats

30mm Single High Load Dynamic Block - Allen

The A2030HL 30mm Single High Load Dynamic Block, is built with a high load stainless-steel sheave, for even faster rolling speeds, higher working loads and lower friction when compared to the standard acetal sheave, allowing the block to work with both rope and wire. Ideal for use in higher loaded applications in dinghies, windsurfing, kitesurfing and...

ALL-0004

€47.50

Deck Hardware

Holt Screw Bung & Socket 22mm Hole

HLT-0009

€3.85

Holt Laser Drain Bung.

Allen 30mm Back to Back High Load Dynamic Block

Product On Demand

Blocks And Cleats

30mm High Load Back To Back Dynamic Block - Allen

The A2038HL 30mm double High Load Back To Back Dynamic Block, is built with high load stainless-steel sheaves, for even faster rolling speeds, higher working loads and lower friction when compared to the standard acetal sheaves, allowing the block to work with both rope and wire. Ideal for use in a dual pole and spinnaker launcher system such as on the 49er.

ALL-0004

€112.00

Customers who bought this product also bought:

ILCA 7 (STD MKII) Sail - With Sail Numbers

Product On Demand

Sails

ILCA 7 (STD MKII) Sail - With Sail Numbers

ILC-0019

€765.00

Standard ILCA 7 (MKII) sail with sail Number included. The batten set is not included.

View

Out-of-Stock

Sail Accessories

ILCA 7 Class Legal Batten Set

ILC-0027

€42.00

ILCA 7 Class Legal Batten Set.

View

Laser Stainless Steel Rudder Retaining Clip

Out-of-Stock

Foils Accessories

Laser Stainless Steel Rudder Retaining Clip

HLT-0021

€3.99

Holt Rudder Retaining Clip made from stainless steel suitable to help keep on the rudder on a Laser dinghy and others.

View

Product on demand - please contact us for delivery date

Sail Numbers

Sailing Number - 30,5 cm - Black

SPR-0002

€3.15

Sailing Number of Dacron self adhesive, 305 mm high and black color, cut according the ILCA 6 and 7 class rules.

Spar Accessories

Curved Kicker Key for ILCA

HLT-0109

€8.50

Curved Kicker Key for ILCA dinghies. Compatible with Laser.

Product On Demand

Sail Numbers

Sail Number - 23,5 cm - Black

SPR-0001

€2.50

Sailing Number of Dacron self adhesive, 235 mm high and black color, cut according the Optimist and ILCA 4 class rules.

Out-of-Stock

Sail Numbers

Optimist Logo for Sail Number

SPR-0007

€4.50

Optimist Logo for Sailing Numbers of Dacron self adhesive. According to class specifications. Please select the color in the specific field.

View

Customers who bought this product also bought:

Product on demand

Sail Numbers

Sail Number - 23,5 cm - Black

SPR-0001

€2.50

Sailing Number of Dacron self adhesive, 235 mm high and black color, cut according the Optimist and ILCA 4 class rules.

Out-of-Stock

Foils Accessories

Laser Stainless Steel Rudder Retaining Clip

Holt Rudder Retaining Clip made from stainless steel suitable to help keep on the rudder on a Laser dinghy and others. We are now providing this product from Allen Brothers. You can purchase it following this link.

HLT-0021

€3.99

View

Spar Accessories

Curved Kicker Key for ILCA

HLT-0109

€8.50

Curved Kicker Key for ILCA dinghies. Compatible with Laser.

Product on demand

Sail Numbers

Optimist Logo for Sail Number

SPR-0007

€4.50

Optimist Logo for Sailing Numbers of Dacron self adhesive. According to class specifications. Please select the color in the specific field.

Sail Accessories

ILCA 7 Class Legal Batten Set

ILC-0027

€42.00

ILCA 7 Class Legal Batten Set.

Product on demand

Sail Numbers

Sailing Number - 30,5 cm - Black

SPR-0002

€3.15

Sailing Number of Dacron self adhesive, 305 mm high and black color, cut according the ILCA 6 and 7 class rules.

Product On Demand

Sails

ILCA 7 (STD MKII) Sail - With Sail Numbers